pro-T-co was developed to improve the working environment by eliminating oil of form removal, to meet the requirements ecological current and improve the quality facings (removal of oily marks, decrease of the bubbling, perfect finish of the facing).
pro-T-co was invented by french people which make a french product. The production will stay french for questions of service, quality.
pro-T-co is shaped on the custom-made for all orders. The maximum width is 1200mm.
Pro-T-co’s technology integrate a black layer witness of wear which appears on surface when the product must be replace.
To preserve fully the adhesive power of Pro-T-co, it should be stored at a temperature raging between 10ºC to 25ºC and must be in shelters of the sun. Once pro-T-co install, there’s no more temperature (-30ºC to +90ºC) and sun exposure constraints.
pro-T-co is conditioned according to the ordered volume.
Yes, we eliminate the tracks of oil, we reduce significantly the bubbling, in consequent the finishing of the facings are much better quality than if we use oil of form removal.
Yes, pro-T-co was tested in laboratory with a large number of concrete and with the most common additives of the market.
pro-T-co is guarantee to be used at least 15 times, but really, it can be Reused at least 30 times if it’s prepared well between each form removal, see the user guide.
Yes, pro-T-co was designed to adherer on all kinds of formwork provided that they are degrease, dry and are of dust.
pro-T-co can be apply by all the workers without special training, however pro-T-co company accompany all his customers during their first use to train them.
After timed test, pro-T-co can be applied within 1 minute per square meter on a clean formwork
The formwork must be degrease, dry and free of dust before the installation.
pro-T-co is insulating, therefore use magnets minimal force of 500kg in the snatch and 300 kg dry slip for maintaining mannequins. We also recommend to use of a PVC cone compensation in the back of the magnet.
Yes, pro-T-co can be marked with a normal pencil very precisely and with a marker erasable.
pro-T-co is a product which entails no sanitary risk for the workers and which engenders no soil pollution. pro-T-co is also a product not dirty , easy of use and eliminate the constraints of the application of oil of form removal.